Owner`s manual

Page 21
DV 42 Indoor Gas Fireplace
Installation
Section 8: Installing the Accessories
Figure 27. Finished glass bead installation.
Installing the Glass Beads and Optional Fire Media
Remove the door and trim as shown previously. Follow these instructions to ensure all
parts are removed or replaced as required. Once the trim and glass doors are removed
place the glass beads AROUND the burner. The glass beads may be placed on the
mesh pilot ame cover but neither the glass beads nor the re media may be
placed on the burner itself. See Figure 27, below.
The DV 42 replace is supplied with glass beads. Optional stone
and driftwood re media are available.