Product specifications

Doc ID: 12080006 Rev: A
Page 14
Technical Support: 800-626-6912 Date: 2/19/10
Air Relaxation System
Turning On\Off
1. Press POWER button to turn ON.
2. Repeat Step #1 to turn OFF.
Inflate\Deflate Pillows for a Customized Massage
1. Press SELECT button.
2. Choose any combination of ZONES 1-3 by pressing button(s).
3. INFLATE\DEFLATE massage pillow(s) by pressing and holding corresponding button.
Selecting Massage Type
1. First, choose area of back (lower, middle, upper) desiring massage by pressing any one, or combination
of, ZONES 1-3.
2. Choose between PULSE or WAVE by pressing button.
Selecting Massage Mode Cycle Time
1. Choose between SHORT, MEDIUM or LONG cycles by pressing CYCLE button.
“POWER”
Turns air relaxation
system on and off
“MODE” / “SELECT”
Selecting of the zones
“MODE” / “PULSE”
Pulse massage
“MODE” / “WAVE”
Wave massage
“INFLATE”
Raise the air; inflate,
in the cushions
“CYCLE”
Choose short, medium, or long
time cycles
“ZONE” / “1”
Upper Zone
“ZONE” / “2”
Middle Zone
“ZONE” / “3”
Lower Zone
“DEFLATE”
Lower the air; deflate, in the
cushions
*Note: The Air Relaxation System is pre-programmed to run for 15 minutes and
cannot be adjusted. To turn the system back on after it turns off, press the
“Power” button and select the desired operating mode.