Product specifications

Doc ID: 12080006 Rev: A
Page 17
Technical Support: 800-626-6912 Date: 2/19/10
Removing the Clean Touch Assembly from the Basin Floor
Removing
the Clean
Touch
Assembly
from the
Basin
Floor
To remove the Clean Touch
Assembly, move the longer
nose in the direction as shown.
Separate the clean touch
inlet cover from the base
twisting counter-clockwise.
Remove the impeller by
lifting from the basin.
Pedicure Product Guidelines
Because there are so many different products on the market, it is difficult to list all of the pedicure products that
are safe to use in our pedicure spas. However, the following guidelines can be used:
• It is your responsibility to understand and follow your state’s regulations regarding product cleaning and
disinfecting requirements.
• Do not use any products containing a foaming agent; this will cause excessive foam.
• It has been determined that products containing non-dissolving abrasives (such as sand and sea salts) will
not harm the internal component structure of your pedicure spa as long as the entire EUROPEAN TOUCH
cleaning requirements are followed without deviation.
• Oil based products may be used in your pedicure spa as long as the cleaning requirements are met.
• Please use pedicure products and cleaning solutions in accordance with each manufacturer's directions.
• It is your responsibility to understand and follow your state’s regulations regarding product cleaning and
disinfecting requirements.
EUROPEAN TOUCH pedicure spas will give you many years of service as long as proper precautions, precise
cleaning, and operating instructions are followed. It is the responsibility of the pedicure spa user to properly
clean and maintain the pedicure spa.