The World's Finest Pedicure Spas OWNER’S MANUAL FORTE’ SPA & ALTERA SPA CRYSTAL CLEAN PIPE-FREE & TRADITIONAL WHIRLPOOL Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 1 of 24
European Touch - Limited Warranty EUROPEAN TOUCH manufactures the Forte and Altera Whirlpool Pedicure Spas with the highest standards for quality materials and workmanship accordingly; EUROPEAN TOUCH expressly warrants its products as follows: To the original owner of the Forte or Altera Whirlpool Pedicure Spa (herein called “pedicure spa”): EUROPEAN TOUCH may repair or replace, at its option, any pedicure spa found to be defective in material or workmanship upon inspection by an authorized representative o
Certificate of Compliance For European Touch 8301 W. Parkland Court Milwaukee, WI U.S.A. 53223 For Compliance of: Equipment: Whirlpool Pedicure Spa Model No.: SOLACE – PF & SOLACE – PF PDP Rated: 220-240VAC, 50Hz, 7.5A To the following standard(s): EN60335-1:2002 EN60335-2-32:2002 EN 55014-1 (Generic): 2001 EN 55014-2 (Generic): 2003 EN61000-4-2 (Criteria C): 2001 EN61000-4-3:2002 EN61000-4-4: 1995 EN61000-4-5: 2001 EN610004-6: 2001 EN61000-4-11: 2004 Project No.
OWNERS MANUAL For Whirlpool Pedicure Spa Models: FORTE’ and ALTERA Important Information Serial Number: W/O Number: Installed by: Installation Date: Serial Number W/O Number Note: Vietnamese and Korean translations available upon request.
Table of Contents European Touch - Limited Warranty ...........................................................................................2 Certificate Of Compliance...........................................................................................................3 Important Information .................................................................................................................4 Introduction....................................................................................
Introduction Thank you for selecting EUROPEAN TOUCH, the leading designer, manufacturer, and marketer of pedicure spas in North America. The Forte’ and Altera pedicure spas (herein referred to as pedicure spa) are innovative whirlpool pedicure spas that have been designed to serve you dependably for many years. Please take time to thoroughly read this entire manual before installation and use.
Installation Specifications Summary Note: Failure to comply with federal, state or local codes and ordinances will result in the warranty being null and void. As stated, the pedicure spa installation must comply with all plumbing and electrical codes. A licensed plumber and licensed electrician must complete the applicable connections of the pedicure spa. Location and Support Select a level location. The floor structure beneath the pedicure spa must be capable of supporting the occupied pedicure spa.
Important Installation and Utility Information Electrical Service: 110V: A 110V, 60 Hz, 15 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa. (220V if ordered in 220V configuration) 220V: A 220-240VAC, 50Hz, 7.5 Amp GFCI protected grounded circuit must be used to supply power to the pedicure spa per local code. Water Supply: All plumbing connections must conform to local codes.
Dimensional Drawings Crystal Clean™ Pipe-Free® and Traditional Whirlpool (With Jets) Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 9 of 24
Crystal Clean™ Pipe-Free® Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 10 of 24
Traditional Whirlpool (With Jets) Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 11 of 24
Specifications Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base) See pages seven through ten. Drain installation: references noted on pages seven through ten, can be installed with optional power drain pump or as gravity drain.
Attaching the Seat Back Your pedicure spa shipped with the seat bottom and seat back already attached to the base. Follow these instructions to connect the seat back to the pedicure spa: Forte’ Altera Step 1: Remove the hitch and clevis pins located Step 1: Remove the hitch and clevis pins on the seat back mounting bracket on the back of located on the seat back mounting bracket on the chair. the back of the chair.
Unpacking the Cushions Your cushion set is packaged in its own box within the pedicure spa shipping carton. All needed parts are located inside of this box. These include: • (1) Seat Back • (1) Seat Bottom • (2) Arm Cushions o Altera Vibration Massage Only: The remote and junction box Please make sure that all parts are removed from the box before discarding the box. If any parts are missing, the customer must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at 800-626-6912.
Attaching the Cushions All pedicure spa cushions attach to the pedicure spa with Velcro. The Forte' and Altera Pedicure spas have cables for the cushions that need to be routed properly. Follow these instructions for attaching the cushions properly to your pedicure spa: Step 1: Your pedicure spa will come with the Velcro already in place for the seat bottom and the seat back. Step 4: Remove the protective film from the Velcro on the bottom of the arm pads.
Component Reference Crystal Clean™ Pipe-Free® Inside Basin View Crystal Clean™ Pipe-Free® Front View Traditional Whirlpool (with Jets) Inside Basin View Traditional Whirlpool (with Jets) Front View Pedicure Product Guidelines Because there are so many different products on the market, it is difficult for us to list all of the pedicure products that are safe to use in our pedicure spas.
Crystal Clean™ Pipe-Free® Spa - Operating Instructions Preparing the Pedicure Spa for Operation: After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. To Operate the Pedicure Spa, Follow These Easy Steps: Adding Water to the Pedicure Spa Basin: 1. Close the drain by turning the chrome drain handle counter-clockwise until it stops.
Crystal Clean™ Pipe-Free® Spa - Cleaning and Disinfecting Procedures Always check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your pedicure spa in good working condition. Proper and continuous cleaning will kill harmful bacteria and germs that can cause infection.
Traditional Whirlpool (With Jets) - Operating Instructions After the pedicure spa is installed and the plumbing and electrical connections are made, clean and disinfect the basin before initial use. Rinse the basin by using the attached water sprayer. Wipe the basin dry with a clean towel. To Operate the Pedicure Spa, Follow These Easy Steps: Adding Water to the Pedicure Spa Basin: 1. Close the drain by turning the chrome drain handle counter-clockwise until it stops. 2.
Traditional Whirlpool (With Jets) - Spa Cleaning and Disinfecting Procedures Always check with your state board for required cleaning and disinfecting procedures. It is extremely important to clean and disinfect your pedicure spa after each pedicure, after the last pedicure of the day, and once a week for overnight cleaning. Regular cleaning will help keep your pedicure spa in good working condition. Proper and continuous cleaning will kill harmful bacteria and germs that can cause infection.
Removal / Replacing Jet Parts Tools required: Pliers 7/8" deep well socket with extension Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed “Traditional Whirlpool (With Jets) - Spa Cleaning and Disinfecting Procedures,” page 19, for cleaning recommendations. Follow the steps below for cleaning and replacing parts: Step 1: Remove the jet eyeball using the pliers.
Removing / Replacing Drain Handle Tools required: Phillips head screwdriver Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site, at www.europeantouch.com. Refer to the cleaning procedure page headed “Crystal Clean™ Pipe-Free® Spa - Cleaning and Disinfecting Procedures,” page 17, and “Traditional Whirlpool (With Jets) - Spa Cleaning and Disinfecting Procedures,” page 19, for cleaning recommendations.
History and Notes Document ID:06080001 Rev: G Technical Support: 800-626-6912 Page 23 of 24
EUROPEAN TOUCH 8301 W. Parkland Court Milwaukee, WI 53223 Phone Number: Toll Free: Fax: Web Site: Email: 414-357-7016 800-626-6912 414-357-6360 www.europeantouch.com info@europeantouch.
