Specifications

Document ID: 30080003 Rev: B Technical Support: 800-626-6912 Page 10 of 12
Installing the floor Mounting Brackets
All Rinato Spas installed with gravity drain and / or hard piped to hot and cold supply lines
MUST be anchored to the floor.
Note: Moving spa with flexible hose connected may cause strain and cause leaks.
1. Adjust all 4 leveling feet until unit is
stable and level.
2. Place the floor mounting brackets on
one of the front feet and on the rear
foot of the opposite side.
3. Mark and drill hole in floor for each
bracket and install 3/8” floor anchor
in each hole.