Specifications

Document ID: 30080003 Rev: A Technical Support: 800-626-6912 Page 11 of 12
GROUNDING INSTRUCTIONS
WARNING – When using electrical products, basic precautions should always be followed,
including the following:
1. DANGER: RISK OF ELECTRIC SHOCK. Connect only to a circuit protected by a
ground-fault circuit interrupter.
2. Grounding is required. The unit should be installed by a qualified service
representative and grounded.
This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the product – if it will not fit
the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug that looks like the
plug illustrated in the sketch below. Make sure that the product is connected to an outlet
having the same configuration as the plug. No adapter should be used with this product