Specifications

Document ID: 30080003 Rev: B Technical Support: 800-626-6912 Page 7 of 12
Attaching the Seat Back and Seat Bottom Cushion
Make sure all parts are removed from box before discarding. If any parts are missing, contact
EUROPEAN TOUCH within 30 days of delivery date for replacement at 1-800-626-6912.
This pedicure spa shipped with the seat back attached and with the seat bottom cushion in the spa
shipping box. Follow these instructions to connect the seat back and the seat bottom to the pedicure
spa:
Note: 2 people are required to perform the following instructions.
Seat Back Attachment
1. Lift seat back vertically and lower into
position.
2. Align seat back bracket holes and insert
clevis pin
from front.
3. Push hitch pin into the clevis pin as
shown.
Note: Repeat steps 2 and 3 for other side.
Clevis Pin Hitch Pin
Seat Movement Attachment
4. Remove the linear drive hitch and
clevis pins located on the seat back
mounting bracket on the back of the
chair.
5. Slide the seat bracket, insert attached,
into the black end on the linear
actuator and line up the holes. Slide
the clevis pin through the holes and
secure by inserting the hitch pin
through the small hole on the clevis
pin.