Specifications

Document ID: 44080001 Rev: A Technical Support: 1-800-626-6912 Page 17 of 28
Operating Instructions
FULL BODY MASSAGE SYSTEM
All massage functions can be operated
using the remote control.
On/Off selection turns the massage
functions on and off.
If an operation is valid the remote will
beep once. If an operation is not valid
the remote will beep twice.
Auto massage will proceed through all
the massage functions using a
preprogrammed routine covering the
back, waist and shoulders.
Individual functions can be selected by
selecting one of the following tapping,
kneading, hitting, pressing, kneading +
tapping or overall. The overall
selection will massage the back only.
Massage adjustments can be made by
selecting the speed or width during the
individual function massages.
Seat adjustments can be made by
selecting seat adjustment to slide the
chair forward and backward or back
adjustment to recline the seat back.
During the message, if massage rollers carry to much weight, this item will immediately start the internal safe
protection circuit to stop all massage activities. Accordingly, control indicators will flash continuously. Buzzer
will sound and no keys will respond at this moment.
1. Kneading indicator – flashes, showing that kneading machine is overloaded.
2. Tapping indicator – flashes, showing that tapping machine is overloaded.
3. All the course indicators – flashes, showing that up/down machine is overloaded.
If the above points occur, please shut off power switch and wait for 10 minutes. Re-open the switch to operate
once more. If the massage roller feels like it is moving to slow, please slightly raise your body (for people with
over 100kgs (220.5 lbs) weight, this situation will occur more frequently. Please take care of this item,
otherwise parts might be damaged).