Specifications

Document ID: 44080001 Rev: A Technical Support: 1-800-626-6912 Page 8 of 28
P
EDICURE SPA SPECIFICATIONS
Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base)
SHIPPING INFORMATION
Weight: 225 lbs. (102 kg) - includes spa, carton, pallet (estimated)
Shipping Dimensions: 65”L (165cm) x 36” W (84cm) x 53”H (135cm)
SPA INFORMATION
Overall dimension, seat upright and forward:
59"L (150cm) x 28.25”W (72cm) x 54.50"H (139cm) (manicure trays down)
59"L (150cm) x 45”W (115cm) x "54.50H (139cm) (manicure trays up)
Minimum area required for chair in rear position and fully reclined:
74”L (188cm) x 28.25”W (72cm) x 48.75"H (124cm)
74”L (188cm) x 45”W (115cm) x 48.75"H (124cm)
Empty weight (complete): 175lbs (80kg)
Water Capacity: 5 U.S. gallons
Whirlpool pump motor: 1/6 HP, 110V, 60Hz
Seat upholstery: Polyurethane
Power source: 110V AC, 2.75 Amps, 60 Hz (GFCI Protected)
X Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber,
conforming to all local and national electrical codes
Construction: Fiber Glass base with steel frame under seat area
Geni-Eye Pipeless: No closed loop circulating pipes, fully drained, easy to clean and sanitize
Electrical switches: Single On/Off switch for water movement motor OR a duel On/Off switch for water
movement and drain pump. A single hand-held, low voltage remote control for
massage motors.
Compliances: Base/ basin: UL listed E122560
Plumbing: ASME/ANSI A112.19.7M (2006) & CSA B45.10
Electrical: UL 1951
Massage Chair: ETL Approved
Limited warranty: One (1) year on parts from date of shipment. Labor is not included.
________________________________________________________________________________________