Specifications

Document ID: 10080000 Rev: B Technical Support: 1-800-626-6912 Page 9 of 20
P
EDICURE SPA SPECIFICATIONS
Hot and cold water supply lines required (hot and cold shut offs may be installed under pedicure spa base)
SHIPPING INFORMATION
Spa ships in three separate boxes on one pallet. One box contains the spa base, one contains the
chair, and one contains the chair arms.
Weight: 225 lbs. (102 kg) - includes spa, carton, pallet (estimated)
Shipping Dimensions: 55”L (140cm) x 36.5” W (93cm) x 58”H (147cm)
SPA INFORMATION
Overall dimension, seat upright and forward:
50"L (110cm) x 30”W (76cm) x 53"H (135cm)
Minimum area required for chair in rear position and fully reclined:
72.5”L (184cm) x 49”W (125cm) x 53"H (135cm)
Empty weight (complete): 155lbs (70.5kg)
Water Fill Line Capacity: 5 U.S. gallons
Whirlpool pump motor: 1/6 HP, 110V, 60Hz
Seat upholstery: Polyurethane
Power source: 110V AC, 2.75 Amps, 60 Hz (GFCI Protected)
X Caution: Pedicure spa must be installed by a licensed electrician and a licensed plumber,
conforming to all local and national electrical codes
Construction: Fiber Glass base
Geni-Eye Pipeless: No closed loop circulating pipes, fully drained, easy to clean and sanitize
Electrical switches: On/Off switch for optional power drain pump. A single hand-held, low voltage remote
control for massage motors.
Compliances: Cushion is TB133 certified
Limited warranty: One (1) year on parts from date of shipment. Labor is not included.
________________________________________________________________________________________
NOTE: Due to our policy of continuous improvements, all specifications are subject to change without notice.
All dimensions and weights are approximate