Full Product Manual

ManualsBrandsEurotec ManualsDeck Parts & AccessoriesDeck Support Plastic Adjustable Pedestal SL (Self leveling - Head) PRO L (10-Pieces/Package)

Eurotec, Inc.· 1860 Renaissance BLvd 5, Sturtevant, WI 53177 · Office +1 262 504 2598 · email: info@eurotec.us · www.eurotec.us

//2018 · Changes, additions, typesetting and printing errors are reserved.

Product Data Sheet – Adjustable Pedestal SL Pro

Page | 1 of 4

Product description

The Adjustable Pedestal SL Pro M and SL Pro L are suitable for the

installation of deck substructures and stone slabs for outdoor use.

The top of the pedestal is freely adjustable and self-leveling, which means that an

uneven floor with a gradient up to 10% can be compensated. The key benefit of the SL

PRO is that no additional pedestals or setups are needed for it to work properly.

The self-leveling pedestal can be used as drainage as well. It can create a small slope of

1–2% so water can run freely.

Summary of content (4 pages)

PAGE 1
Product Data Sheet – Adjustable Pedestal SL Pro Product description The Adjustable Pedestal SL Pro M and SL Pro L are suitable for the installation of deck substructures and stone slabs for outdoor use. The top of the pedestal is freely adjustable and self-leveling, which means that an uneven floor with a gradient up to 10% can be compensated. The key benefit of the SL PRO is that no additional pedestals or setups are needed for it to work properly. © by EuroTec, Inc.
PAGE 2
Product Data Sheet – Adjustable Pedestal SL Pro Material Polypropylen-Copolymer (PP-C) © by EuroTec, Inc. · Status 07//2018 · Changes, additions, typesetting and printing errors are reserved. Advantages • • • • • UV stability High creep rupture strength Very good chemical resistance Acoustic damping properties Self-leveling up to 10% slope • • Freely adjustable height of 2⅛ - 4’’ Combinable with click adapters Eurotec, Inc.
PAGE 3
Product Data Sheet – Adjustable Pedestal SL Pro • Combinable with Extension rings +1⅝ and +3⅞’’ Article table Art.-No. 946071-SL 946072-SL Product description Assembly height* [mm] 3 SL Pro-M 2‘‘ /16 – 3‘‘ 5/16 SL Pro-L 2‘‘ 7/8 – 4‘‘ Load bearing capacity [lbf] 1,795 1,795 PU 10 10 * The assembly height can only be reached with the fitting adapters! © by EuroTec, Inc. · Status 07//2018 · Changes, additions, typesetting and printing errors are reserved.
PAGE 4
Product Data Sheet – Adjustable Pedestal SL Pro © by EuroTec, Inc. · Status 07//2018 · Changes, additions, typesetting and printing errors are reserved. Application examples If you are not familiar with the application of the product at hand, especially with the handling according to given regulations, it is essential to get in contact with our technical application support department. Eurotec, Inc.· 1860 Renaissance BLvd 5, Sturtevant, WI 53177 · Office +1 262 504 2598 · email: info@eurotec.us · www.