User Guide

High-Speed Wireless PC/104Plus Adapter Version: 1.0
Page 14 of 42
13. The installation of the PC/104Plus card is now complete. Click on the Finish
button.
2.3 Verify the installation
Follow the steps below in order to verify that the PC/104Plus card has been installed
and is functioning properly:
1. Click on Start > Settings > Control Panel.
2. Double click on the System icon.
3. Click on the Hardware tab, and then click on the Device Manger button.
4. Select Network adapters to view a list of network adapters on your PC. You
will then see a window similar to the image below.
5. Make sure that a yellow (?) or a red (X) does not appear next to the
PC/104Plus card (WLAN AR5001X+ Wireless Network Adapter). If you do
see a (?) or (X) you would need to uninstall the drivers, and reinstall them
again. In order to uninstall the drivers refer to Chapter 4 Uninstallation.