User Guide

High-Speed Wireless PC/104Plus Adapter Version: 1.0
Page 29 of 42
 ASCII Text (all keyboard characters): select this option if you would like to
use ASCII text as the Pre-shared Key.
 Per-User-Key: enter a per-user-key, and then select an encryption type
from the drop-down list (64/128/152-bit).
 Shared Key 1-4: enter the shared-key, and then select an encryption type
from the drop-down list.
 Click on the OK button to continue.
3.2.2.3 Advanced
The third tab displayed is the Advanced tab. Here you can configure details about
an Access Point or Ad Hoc network Configuration for each security method is
described below.
3.2.2.3.1 Access Point
 Power Save Mode: select a power save mode from the drop-down list.
 Network Type: select Access Point from the drop-down list.
 802.11b Preamble: select Short & Long or Long Only.
 Transmit Power Level: select a power level from the drop-down list.
 Wireless Mode: place a check in this box if you would like to use the
available frequencies.
 Click on the OK button to continue.