User`s manual

Am186
TM
CC Microcontroller ISDN TA Reference Design Manual
B-1
Appendix B
Glossary of Terms
2B+D - Describes the BRI configuration for ISDN of two bearer channels and one
D channel.
2B1Q - Two binary, one quaternary, data format for the U-interface. One quaternary
symbol (±3, ±1) represents two bits.
B Channel - Bearer channel, 64kbps voice/data channel for ISDN.
bps - Bits per second.
BRI - Basic Rate Interface. The simple 2B+D access method defined by CCITT
recommendation I.430.
CCITT/ITU - International Telegraph and Telephone Consultative Committee /
International Telecommunications Union. ITU is an agency of the UN. CCITT is
a committee of the ITU which makes recommendations for network
communications.
C.O. - Central Office.
CPE - Customer Premises Equipment. Devices such as the NT1, designated to be
the customer's responsibility to provide.
D Channel - 16kbps channel used to carry out-of-band network signaling or packet-
mode user data. (Refer to the ITU standards found at www.itu.ch.)
FCC - Federal Communications Commission. Regulates the U.S. telephone
industry.
GCI - General Circuit Interface.
about.book Page 1 Friday, December 18, 1998 9:41 AM