User manual

PRI – Cellular Multi-Cell Gateway
6 / 54
 Mandatory - General configurations
In order to operate the system , a mandatory basic setup should be performed in one of the
two optional connections, seria l RS-232 or via Ethernet interface. The 1
st
time configuration
is recommended to be performed via RS -232 while monitoring and reports in a later stage
are recommended to be performed via IP.
Refer to "Chapter 3: Basic Configurations with the M anagement Application".
 Mandatory – 1
st
time system configuration via RS -232
Use the RS-232 connection and PRI Management MS -Windows Application for your first
time configuration. You can use this method for later day -to-day management, however the
option to manage your PRI cellular Gateway system via IP is highly recommended as you
can have the management done remotely from the system via internet connection.
Refer to "Chapter 3: Basic Configurations with the Management A pplication" and
"Chapter 3.1: Management via RS -232 Serial connection".
Optional:
 Optional - Setting the TCP/IP connections
If you wish to operate the Management Application for system management via internet
connection, the proper TCP/IP settings should be performed.
Refer to "Chapter 9: TCP/IP Setting".
 Optional - Managing the system via Ethernet interface connection
In order to manage, configure and mo nitor the system via Ethernet, the system TCP/IP
connection, the Ethernet cables , and the PRI Management MS -Windows Application should
be properly installed and configured.
Refer to "Chapter 3.2: Management via Ethernet interface Connection".