User's Manual

BoltAIR 20-31 User's manual EN How to get started
© 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTAIR-20-31-11_MAN_EN_1-3
Revision: 1-3 2022.07.28
3 / 60
HOW TO GET STARTED
To get started with the BoltAIR 20-31 complete this procedure::
1. Read carefully and understand the instructions and warnings contained in this User's
manual.
To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the
instructions and warnings contained in this manual.
For more information, refer to: "Safety-related information" on page7.
If you have questions about these instructions, refer to: https://www.eurotech.com/en/support.
2. Know the BoltAIR 20-31 and its interfaces.
For more information, refer to:
l
"Product Overview" on page19
l
"Technical specifications" on page22
l
"BoltAIR 20-31 interfaces" on page35
3. Install the BoltAIR 20-31.
For more information, refer to:
l
"Mechanical specifications" on page50
l
"Product installation and power supply" on page47
4. Supply power to the BoltAIR 20-31 respecting all safety instructions.
For more information, refer to:"How to supply power to the system" on page50
5. Start developing your IoT applications.
The BoltAIR 20-31 supports the Eurotech Everyware Software Framework (ESF). ESF is a smart
application container that enables remote management of IoT gateways and provides a wide
range of APIs allowing you to write and deploy your own IoT application.
For more information, refer to:
l
"Eurotech Everyware IoT" on page53
l
http://esf.eurotech.com/docs.