User's Manual
Table Of Contents
- Intended audience of this document
- How to get technical support
- Trademarks
- Revision history
- How to get started
- Contents
- 1 Safety-related information
- 2 Consignes de sécurité
- 3 Technical terms and graphical symbols
- 4 Termes techniques et symboles graphiques
- 5 Product Overview
- 6 Certifications
- 7 Main CPU Module interfaces
- 7.1 Main CPU Module connectors (vers: -11)
- 7.2 Main CPU Module connectors (vers: -21 and -31)
- 7.3 Main CPU Modules Interfaces
- 7.3.1 USB0 and USB1: USB 3.0 connectors specifications
- 7.3.2 DP: Mini DisplayPort specifications
- 7.3.3 ETH0, ETH1, ETH2: Gb Ethernet connectors specifications
- 7.3.4 PWR IN: Power IN connector specifications
- 7.3.5 Navigation system specifications
- 7.3.6 LTE cellular modem specifications
- 7.3.7 Wi-Fi and BT specifications (vers: -21 and -31 only)
- 7.3.8 MVB ESD+ (RX only or RX/TX) interface specifications (vers: -11 only)
- 7.3.9 Earth connection terminal specifications
- 7.4 Main CPU Module LED indicators
- 7.5 Main CPU Module Service Panel and Service Interfaces
- 8 BoltAIR 20-31 interfaces
- 9 BoltIO 20-31 interfaces
- 10 BoltSER 20-31 interfaces
- 11 Product installation and power supply
- 11.1 Introduction
- 11.2 How to install the product on a DIN Rail
- 11.3 How to remove the product from a DIN Rail
- 11.4 Mechanical specifications
- 11.5 How to supply power to the system
- 11.5.1 Power supply specifications
- 11.5.2 The Ignition Key (Key Signal)
- 11.5.3 Main CPU Module and Expansion Modules electrical interconnections
- 11.5.4 Power supply safety instructions
- 11.5.5 How to supply power and turn ON the product
- 11.5.6 How to turn OFF the system
- 11.5.7 How to trigger a hardware reset of the system
- 12 Eurotech Everyware IoT
- 13 Product maintenance
- Notes
BoltGATE 20-31 User's manual EN
Intended audience of this document
This document is intended for system integrators. System integrator is a term applied to skilled
persons who are specialized in linking together, physically or functionally, different computing systems
and software applications to operate as a coordinated whole in compliance with the applicable
regulations.
Skilled person is a term applied to persons who have training or experience in the equipment
technology, particularly in knowing the various energies and energy magnitudes used in the equipment.
Skilled persons are expected to use their training and experience to recognize energy sources capable
of causing pain or injury and to take action for protection from injury from those energies. Skilled persons
should also be protected against unintentional contact or exposure to energy sources capable of
causing injury.
How to get technical support
To get technical support, refer to: https://www.eurotech.com/en/support.
The following resources are available:
l
Return Merchandise Authorization: https://www.eurotech.com/en/support/rma
l
Downloads: https://www.eurotech.com/download
l
Support Portal: https://support.eurotech.com/
Trademarks
All trademarks, registered trademarks, logos, trade names, products names contained in this document
are the property of their respective owners.
Revision history
Revision Description Date
1-0 First release 2021.02.26
1-1 Updated Chapter 5 - "Regulatory information" 2021.08.02
1-2 Updated figures.
Corrected table headers in sections:
l
4.4.3 - "BoltIO 20-31 Technical Specifications"
l
4.4.4 - "BoltSER 20-31 Technical Specifications"
2021.09.06
1-3 Updated LED information.
Updated antennas information.
2022.02.28
1-4 Inserted UKCA, FCC, and ISED information.
Inserted section "Labels on the product"
2022.05.20
1-5 Inserted Notice in the sections "Wi-Fi and BT specifications"
Updated minimum antenna distance for wireless safety to 25 cm
2022.05.27
1-6 In the file "AIR_Interfaces.htm": removed sentence about the 32-steps
potentiometer .
In the file "SER_LED.htm": fixed wrong image
Removed block diagram section.
Updated section "Antenna list"
2022.07.28
2 / 98 © 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28