User's Manual
Table Of Contents
- Intended audience of this document
- How to get technical support
- Trademarks
- Revision history
- How to get started
- Contents
- 1 Safety-related information
- 2 Consignes de sécurité
- 3 Technical terms and graphical symbols
- 4 Termes techniques et symboles graphiques
- 5 Product Overview
- 6 Certifications
- 7 Main CPU Module interfaces
- 7.1 Main CPU Module connectors (vers: -11)
- 7.2 Main CPU Module connectors (vers: -21 and -31)
- 7.3 Main CPU Modules Interfaces
- 7.3.1 USB0 and USB1: USB 3.0 connectors specifications
- 7.3.2 DP: Mini DisplayPort specifications
- 7.3.3 ETH0, ETH1, ETH2: Gb Ethernet connectors specifications
- 7.3.4 PWR IN: Power IN connector specifications
- 7.3.5 Navigation system specifications
- 7.3.6 LTE cellular modem specifications
- 7.3.7 Wi-Fi and BT specifications (vers: -21 and -31 only)
- 7.3.8 MVB ESD+ (RX only or RX/TX) interface specifications (vers: -11 only)
- 7.3.9 Earth connection terminal specifications
- 7.4 Main CPU Module LED indicators
- 7.5 Main CPU Module Service Panel and Service Interfaces
- 8 BoltAIR 20-31 interfaces
- 9 BoltIO 20-31 interfaces
- 10 BoltSER 20-31 interfaces
- 11 Product installation and power supply
- 11.1 Introduction
- 11.2 How to install the product on a DIN Rail
- 11.3 How to remove the product from a DIN Rail
- 11.4 Mechanical specifications
- 11.5 How to supply power to the system
- 11.5.1 Power supply specifications
- 11.5.2 The Ignition Key (Key Signal)
- 11.5.3 Main CPU Module and Expansion Modules electrical interconnections
- 11.5.4 Power supply safety instructions
- 11.5.5 How to supply power and turn ON the product
- 11.5.6 How to turn OFF the system
- 11.5.7 How to trigger a hardware reset of the system
- 12 Eurotech Everyware IoT
- 13 Product maintenance
- Notes
6 Certifications BoltGATE 20-31 User's manual EN
6.7 REACH compliance
This product is assessed to be compliant with the regulation (EC) No 1907/2006 of the European
Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH), with the exceptions allowed by the EU Technical
Committee.
Eurotech has set in place a monitoring process to assess compliance to REACH regulation.
For details and more information, refer to: https://www.eurotech.com/en/support.
6.8 Rail - Rolling stock compliance
This product is manufactured in compliance with the following standards:
Compliance Reference
Operating temperature
l
Operating temperature class: EN 50155 Class OT3 (-20°C to +70°C)
l
Switch-on extended operating temperature class:EN 50155 Class ST1
(+85°C)
l
Temperature variation class: EN 50155 Class H1
Relative humidity EN 50155:2017
Shock and vibration EN 61373 Category 1 class B
Safety EN 50155:2017
Fire protection EN 45545-2:2013+A1:2015, HL3
Power supply interruptions EN 50155:2017 Class S2 (up to 10ms)
EMC emissions EN 50121-3-2:2016
EMC immunity EN 50121-3-2:2016
40 / 98 © 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28