User's Manual
Table Of Contents
- Intended audience of this document
- How to get technical support
- Trademarks
- Revision history
- How to get started
- Contents
- 1 Safety-related information
- 2 Consignes de sécurité
- 3 Technical terms and graphical symbols
- 4 Termes techniques et symboles graphiques
- 5 Product Overview
- 6 Certifications
- 7 Main CPU Module interfaces
- 7.1 Main CPU Module connectors (vers: -11)
- 7.2 Main CPU Module connectors (vers: -21 and -31)
- 7.3 Main CPU Modules Interfaces
- 7.3.1 USB0 and USB1: USB 3.0 connectors specifications
- 7.3.2 DP: Mini DisplayPort specifications
- 7.3.3 ETH0, ETH1, ETH2: Gb Ethernet connectors specifications
- 7.3.4 PWR IN: Power IN connector specifications
- 7.3.5 Navigation system specifications
- 7.3.6 LTE cellular modem specifications
- 7.3.7 Wi-Fi and BT specifications (vers: -21 and -31 only)
- 7.3.8 MVB ESD+ (RX only or RX/TX) interface specifications (vers: -11 only)
- 7.3.9 Earth connection terminal specifications
- 7.4 Main CPU Module LED indicators
- 7.5 Main CPU Module Service Panel and Service Interfaces
- 8 BoltAIR 20-31 interfaces
- 9 BoltIO 20-31 interfaces
- 10 BoltSER 20-31 interfaces
- 11 Product installation and power supply
- 11.1 Introduction
- 11.2 How to install the product on a DIN Rail
- 11.3 How to remove the product from a DIN Rail
- 11.4 Mechanical specifications
- 11.5 How to supply power to the system
- 11.5.1 Power supply specifications
- 11.5.2 The Ignition Key (Key Signal)
- 11.5.3 Main CPU Module and Expansion Modules electrical interconnections
- 11.5.4 Power supply safety instructions
- 11.5.5 How to supply power and turn ON the product
- 11.5.6 How to turn OFF the system
- 11.5.7 How to trigger a hardware reset of the system
- 12 Eurotech Everyware IoT
- 13 Product maintenance
- Notes
BoltGATE 20-31 User's manual EN 8 BoltAIR 20-31 interfaces
© 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28
59 / 98
8.1.1 LTE modem specifications
Feature Description
Key Features LTE Cat 4 module optimized for M2M and IoT applications
Maximum data rates up to 150Mbps downlink and 50Mbps uplink
Worldwide LTE, UMTS/HSPA(+) and GSM/GPRS/EDGE coverage
Downlink MIMO (Supports Rx-diversity Antenna)
Supported Bands
LTE-FDD B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B18/ B19/ B20/ B25/ B26/ B28
LTE-TDD B38/ B39/ B40/ B41
WCDMA B1/ B2/ B4/ B5/ B6/ B8/ B19
GSM B2/ B3/ B5/ B8
Data
LTE LTE-FDD Max 150 Mbps (DL)/ Max 50 Mbps (UL)
LTE-TDD Max 130 Mbps (DL)/ Max 30 Mbps (UL)
UMTS DC-HSDPA Max 42 Mbps (DL)
HSUPA Max 5.76 Mbps (UL)
WCDMA Max 384 Kbps (DL)/ Max 384 Kbps (UL)
GSM EDGE Max 296 Kbps (DL)/ Max 236.8 Kbps (UL)
GPRS Max 107 Kbps (DL)/ Max 85.6 Kbps (UL)
TX Output Power
Class 4 33dBm±2dB
33dBm±2dB
for
for
GSM850
EGSM900
Class 1 30dBm±2dB
30dBm±2dB
for
for
DCS1800
PCS1900
Class E2 27dBm±3dB
27dBm±3dB
26dBm±3dB
26dBm±3dB
for
for
for
for
GSM850 8-PSK
EGSM900 8-PS
DCS1800 8-PSK
PCS1900 8-PSK
Class 3 24dBm+1/-3dB
23dBm±2dB
23dBm±2dB
for
for
for
WCDMA bands
LTE-FDD bands
LTE-TDD bands
Main and RX-diversity
Antenna Requirements
VSWR ≤ 2
Efficiency > 30%
Max Input Power 50W
Input Impedance 50Ω
Cable Insertion Loss < 1dB for GSM850, EGSM900, WCDMA B5/B6/B8/B19, LTE-FDD
B5/ B8/ B12/ B13/ B18/ B19/ B20/ B26/ B28
< 1.5dB for DCS1800, PCS1900, WCDMA B1/B2/B4, LTE-FDD B1/
B2/ B3/ B4/ B25/ B39
< 2dB for LTE-FDD B7, LTE-TDD B38/ B40/ B41