User's Manual
Table Of Contents
- Intended audience of this document
- How to get technical support
- Trademarks
- Revision history
- How to get started
- Contents
- 1 Safety-related information
- 2 Consignes de sécurité
- 3 Technical terms and graphical symbols
- 4 Termes techniques et symboles graphiques
- 5 Product Overview
- 6 Certifications
- 7 Main CPU Module interfaces
- 7.1 Main CPU Module connectors (vers: -11)
- 7.2 Main CPU Module connectors (vers: -21 and -31)
- 7.3 Main CPU Modules Interfaces
- 7.3.1 USB0 and USB1: USB 3.0 connectors specifications
- 7.3.2 DP: Mini DisplayPort specifications
- 7.3.3 ETH0, ETH1, ETH2: Gb Ethernet connectors specifications
- 7.3.4 PWR IN: Power IN connector specifications
- 7.3.5 Navigation system specifications
- 7.3.6 LTE cellular modem specifications
- 7.3.7 Wi-Fi and BT specifications (vers: -21 and -31 only)
- 7.3.8 MVB ESD+ (RX only or RX/TX) interface specifications (vers: -11 only)
- 7.3.9 Earth connection terminal specifications
- 7.4 Main CPU Module LED indicators
- 7.5 Main CPU Module Service Panel and Service Interfaces
- 8 BoltAIR 20-31 interfaces
- 9 BoltIO 20-31 interfaces
- 10 BoltSER 20-31 interfaces
- 11 Product installation and power supply
- 11.1 Introduction
- 11.2 How to install the product on a DIN Rail
- 11.3 How to remove the product from a DIN Rail
- 11.4 Mechanical specifications
- 11.5 How to supply power to the system
- 11.5.1 Power supply specifications
- 11.5.2 The Ignition Key (Key Signal)
- 11.5.3 Main CPU Module and Expansion Modules electrical interconnections
- 11.5.4 Power supply safety instructions
- 11.5.5 How to supply power and turn ON the product
- 11.5.6 How to turn OFF the system
- 11.5.7 How to trigger a hardware reset of the system
- 12 Eurotech Everyware IoT
- 13 Product maintenance
- Notes
9 BoltIO 20-31 interfaces BoltGATE 20-31 User's manual EN
9.1.3.3 I/O 0: 12x Digital Inputs connector specifications
Connector Layout:
Connector Specifications:
l
Standard HD 15-Pin D-Sub (plug)
l
Gender: Male
Mating Connector Specifications:
l
Standard HD 15-Pin D-Sub (socket)
l
Gender: Female
Connector Pinout:
Pin # Signal Type Description
1 IN1 I Isolated Digital Input 1
2 IN2 I Isolated Digital Input 2
3 IN3 I Isolated Digital Input 3
4 IN4 I Isolated Digital Input 4
5 C1 I Common for Inputs 1 to 4
6 C2 I Common for Inputs 5 to 8
7 IN5 I Isolated Digital Input 5
8 IN6 I Isolated Digital Input 6
9 IN7 I Isolated Digital Input 7
10 IN8 I Isolated Digital Input 8
11 C3 I Common for Inputs 9 to 12
12 IN9 I Isolated Digital Input 9
13 IN10 I Isolated Digital Input 10
14 IN11 I Isolated Digital Input 11
15 IN12 I Isolated Digital Input 12
9.1.3.4 I/O 1: 4x Digital Inputs + 4x Digital Outputs
Connector Layout:
Connector Specifications:
l
Standard HD 15-Pin D-Sub (plug)
l
Gender: Male
Mating Connector Specifications:
l
Standard HD 15-Pin D-Sub (socket)
l
Gender: Female
Connector Pinout (pins not listed are not connected):
Pin # Signal Type Description
1 IN13 I Isolated Digital Input 13
2 IN14 I Isolated Digital Input 14
3 IN15 I Isolated Digital Input 15
4 IN16 I Isolated Digital Input 16
5 C7 I Common for Inputs 13 to 16
11 C8 O Common for Outputs 13 to 16
12 OUT13 O Isolated Digital Output 13
13 OUT14 O Isolated Digital Output 14
14 OUT15 O Isolated Digital Output 15
15 OUT16 O Isolated Digital Output 16
72 / 98 © 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28