User's Manual
Table Of Contents
- Trademarks
- Intended audience of this document
- Revision history
- How to get started
- Contents
- 1 Safety instructions
- 2 Consignes de securite
- 3 How to receive technical assistance
- 4 Comment obtenir une assistance technique
- 5 Conventions used
- 6 Product overview
- 7 Regulatory information
- 7.1 CE compliance
- 7.2 FCC/ISED compliance
- 7.2.1 FCC marking
- 7.2.2 FCC compliance: Class B Digital Device
- 7.2.3 FCC restrictions on 5 GHz Wi-Fi usage
- 7.2.4 ISED Canada compliance
- 7.2.5 ISED Class B Digital Device Notice
- 7.2.6 Responsible parties: Canadian Representative contact information
- 7.2.7 RF Radiation Exposure Statement
- 7.2.8 Labeling information
- 7.3 Antennas List
- 7.4 RoHS 3 compliance
- 7.5 REACH compliance
- 8 Interfaces overview
- 9 Interfaces in detail
- 9.1 Wi-Fi and Bluetooth
- 9.2 Internal Cellular Modem
- 9.3 MicroSIM card receptacles
- 9.4 GNSS
- 9.5 USB 0, USB 1, USB 2
- 9.6 ETH 0, ETH 1
- 9.7 COM 0, COM 1
- 9.8 CAN 0, CAN 1
- 9.9 Earth connection terminal
- 9.10 Display Port
- 9.11 Digital I/O and Analog IN
- 9.12 Audio connector
- 9.13 TTL Serial Console
- 9.14 MicroSD card receptacle
- 9.15 RTC (Real Time Clock)
- 9.16 TPM
- 9.17 Watchdog
- 9.18 Accelerometer and Gyroscope
- 9.19 Programmable pushbutton
- 10 Eurotech Everyware IoT
- 11 Mechanical specifications and dimensions
- 12 How to install the product
- 13 Power supply. How to turn ON/OFF and reset the product
- 14 How to maintain the product
- Notes
DynaGATE 20-30 User manual Rev. 0-7 6 Product overview
6 PRODUCT OVERVIEW
6.1 Product description
The DynaGATE 20-30 is an IoT Edge Gateway, E-Mark certified, that addresses the challenges of the
next-generation applications for smart transportation and fleet management. It combines hardware,
software and connectivity to bridge the vehicle with leading Cloud services.
Based on the Intel
®
Atom™ x5 and x7 (E39xx) processor, with up to 8GB of ECC RAM and 32GB of
eMMC, the DynaGATE 20-30 is a fanless, compact unit designed to exceed the requirements of
automotive applications: it features extended operating temperature range, IP54 ingress protection, a wide
range automotive power supply and a 6-axis sensor (accelerometer + gyroscope). It provides protected
USB 2.0 and 3.0, one configurable RS-232/422/485, DI/DOs, and dual CAN bus interfaces - plus, a wide
range of connectivity capabilities including two Gigabit Ethernet on M12, up to two LTE Cat 4/6 cellular
modem, Wi-Fi, Bluetooth Low Energy, and a GPS with Untethered Dead Reckoning; two mPCIe and one
M.2 slots can be reconfigured to host custom expansions and peripherals (Factory Option). Sophisticated
power saving and management capabilities include: power monitoring, Wake-On-Ring/SMS and Wake-
On-RTC.
The DynaGATE 20-30 adds integrated hardware and software security through a dedicated TPM 2.0 chip
and is Secure Boot ready.
Powered by Everyware Software Framework (ESF), the Eurotech framework for IoT Edge devices, the
DynaGATE 20-30 is a gateway that is easy to use, program and manage. The friendly web-based user
interface allows to visually compose powerful data flows, such as the ones to acquire data from the vehicle
through the built-in support for the J1939 and J1708 standards. Vehicle data can then be analyzed on the
Edge and published to the Cloud though the popular MQTT protocol. Everyware Cloud, Eurotech IoT
Integration Platform, completes this solution by providing data integration to the applications and by
offering complete management of the devices deployed on the field.
For more information visit www.eurotech.com.
Figure 6.1 - The DynaGATE 20-30, front side
23 / 76