User's Manual

DynaGATE 20-30 User manual Rev. 0-7 6 Product overview
6.3 Intended use and not allowed uses of the product
The product is intended for professional use and must be installed by qualified personnel only.
The product must be installed in a secured location, accessible to authorized personnel only (for
example in a cabinet / technical compartment).
6.3.1 Intended use
The DynaGATE 20-30 is an IoT Edge Gateway, E-Mark certified, that addresses the challenges of the
next-generation applications for smart transportation and fleet management.
The DynaGATE 20-30 must:
l Be installed in a secured location, only accessible to authorized personnel (for example in a cabinet
/ technical compartment), and not exposed to atmospheric agents
l Be used indoors or in automotive applications*
l Be used with appropriate interconnecting and power cables
l Be used with an external DC power supply source that:
o
Meets the requirements stated on the identification label of the product
o
Can deliver at least Nominal: 17 W
l Be used including an external fuse on the line coming from the negative terminal of the DC power
source (a 4 A fuse is appropriate for 12 VDC operation)
*Note: Before using the product in automotive applications in any EU Member State, switch OFF the 5
GHz Wi-Fi band.
6.3.2 Not allowed uses
Do not use the DynaGATE 20-30:
l In defence applications
l Outdoors
l In safety-critical applications
l In environments with potentially explosive atmospheres
l If not installed according to the instructions and warnings contained in this document.
Note: In any EU Member State, do not operate the product in automotive applications within the 5 GHz Wi-
Fi band.
25 / 76