User's Manual
Table Of Contents
- Trademarks
- Intended audience of this document
- Revision history
- How to get started
- Contents
- 1 Safety instructions
- 2 Consignes de securite
- 3 How to receive technical assistance
- 4 Comment obtenir une assistance technique
- 5 Conventions used
- 6 Product overview
- 7 Regulatory information
- 7.1 CE compliance
- 7.2 FCC/ISED compliance
- 7.2.1 FCC marking
- 7.2.2 FCC compliance: Class B Digital Device
- 7.2.3 FCC restrictions on 5 GHz Wi-Fi usage
- 7.2.4 ISED Canada compliance
- 7.2.5 ISED Class B Digital Device Notice
- 7.2.6 Responsible parties: Canadian Representative contact information
- 7.2.7 RF Radiation Exposure Statement
- 7.2.8 Labeling information
- 7.3 Antennas List
- 7.4 RoHS 3 compliance
- 7.5 REACH compliance
- 8 Interfaces overview
- 9 Interfaces in detail
- 9.1 Wi-Fi and Bluetooth
- 9.2 Internal Cellular Modem
- 9.3 MicroSIM card receptacles
- 9.4 GNSS
- 9.5 USB 0, USB 1, USB 2
- 9.6 ETH 0, ETH 1
- 9.7 COM 0, COM 1
- 9.8 CAN 0, CAN 1
- 9.9 Earth connection terminal
- 9.10 Display Port
- 9.11 Digital I/O and Analog IN
- 9.12 Audio connector
- 9.13 TTL Serial Console
- 9.14 MicroSD card receptacle
- 9.15 RTC (Real Time Clock)
- 9.16 TPM
- 9.17 Watchdog
- 9.18 Accelerometer and Gyroscope
- 9.19 Programmable pushbutton
- 10 Eurotech Everyware IoT
- 11 Mechanical specifications and dimensions
- 12 How to install the product
- 13 Power supply. How to turn ON/OFF and reset the product
- 14 How to maintain the product
- Notes
7 Regulatory information DynaGATE 20-30 User manual Rev. 0-7
7.1.6 RED 2014/53/EU compliance
Some versions of this product meet the requirements of the Directive 2014/53/EU of the European
Parliament and of the Council of 16 April 2014 on the harmonization of the laws of the Member States
relating to the making available on the market of radio equipment.
For more information see "Technical specifications" on page26.
Modification statement
Eurotech does not approve any changes or modifications to this product by the user. Any changes or
modifications could void the user’s authority to operate this product.
7.1.6.1 Class II product
According to Commission Decision 2000/299/EC of 6 April 2000, establishing the initial classification of
radio equipment and telecommunications terminal equipment and associated identifiers, the product falls
within the scope of Class II.
Due to EU restrictions on 5 GHz Wi-Fi bands the product is limited to indoor operation and should only be
operated in the frequency band 5150 MHz – 5250 MHz (U-NII-1) covering 20 MHz channels (36,40,44,48),
40 MHz channels (38,46), and 80 MHz channel (42).
Dynamic Frequency selection (DFS) as master or slave is not supported by the product.
AT BE BG CH CY CZ DE
DK EE EL ES FI FR HR
HU IE IT IS LI LT LU
LV MT NL NO PL PT RO
SE SI SK TR UK
30 / 76