User's Manual
Table Of Contents
- Trademarks
- Intended audience of this document
- Revision history
- How to get started
- Contents
- 1 Safety instructions
- 2 Consignes de securite
- 3 How to receive technical assistance
- 4 Comment obtenir une assistance technique
- 5 Conventions used
- 6 Product overview
- 7 Regulatory information
- 7.1 CE compliance
- 7.2 FCC/ISED compliance
- 7.2.1 FCC marking
- 7.2.2 FCC compliance: Class B Digital Device
- 7.2.3 FCC restrictions on 5 GHz Wi-Fi usage
- 7.2.4 ISED Canada compliance
- 7.2.5 ISED Class B Digital Device Notice
- 7.2.6 Responsible parties: Canadian Representative contact information
- 7.2.7 RF Radiation Exposure Statement
- 7.2.8 Labeling information
- 7.3 Antennas List
- 7.4 RoHS 3 compliance
- 7.5 REACH compliance
- 8 Interfaces overview
- 9 Interfaces in detail
- 9.1 Wi-Fi and Bluetooth
- 9.2 Internal Cellular Modem
- 9.3 MicroSIM card receptacles
- 9.4 GNSS
- 9.5 USB 0, USB 1, USB 2
- 9.6 ETH 0, ETH 1
- 9.7 COM 0, COM 1
- 9.8 CAN 0, CAN 1
- 9.9 Earth connection terminal
- 9.10 Display Port
- 9.11 Digital I/O and Analog IN
- 9.12 Audio connector
- 9.13 TTL Serial Console
- 9.14 MicroSD card receptacle
- 9.15 RTC (Real Time Clock)
- 9.16 TPM
- 9.17 Watchdog
- 9.18 Accelerometer and Gyroscope
- 9.19 Programmable pushbutton
- 10 Eurotech Everyware IoT
- 11 Mechanical specifications and dimensions
- 12 How to install the product
- 13 Power supply. How to turn ON/OFF and reset the product
- 14 How to maintain the product
- Notes
9 Interfaces in detail DynaGATE 20-30 User manual Rev. 0-7
Feature Description
RF Output Power
(Typical - Conductive)
802.11a: 15.5 dBm at 54M ±2 dBm
802.11b: 18 dBm at 11M ±2 dBm
802.11g: 15.5 dBm at 54M ±2 dBm
802.11n 5G HT20: 17 dBm at MCS0 15 dBm at MCS7 ±2 dBm
802.11n 5G HT40: 16 dBm at MCS0 14 dBm at MCS7 ±2 dBm
802.11n 2.4G HT20: 18 dBm at MCS0 16 dBm at MCS7 ±2 dBm
802.11n 2.4G HT40: 17 dBm at MCS0 15 dBm at MCS7 ±2 dBm
802.11ac 5G VHT20: 15 dBm at MCS0 12 dBm at MCS8 ±2 dBm
802.11ac 5G VHT40 : 14 dBm at MCS0 11 dBm at MCS8 ±2 dBm
802.11ac 5G VHT80: 14 dBm at MCS0 11 dBm at MCS8 ±2 dBm
BT: (Class 2 Device) +2 dBm ≤ Output Power ≤ +6 dBm
RF receive Sensitivity
(Typical)
802.11a: 54M less than 74 dBm
802.11b: 11M less than 89 dBm
802.11g: 54M less than 75 dBm
802.11n 2.4G: HT20 MCS7 less than 75 dBm 92 dBm at MCS0
HT40 MCS7 less than 72 dBm 89 dBm at MCS0
802.11n 5G: HT20 MCS7 less than 74 dBm 91 dBm at MCS0
HT40 MCS7 less than 71 dBm 88 dBm at MCS0
802.11ac 5G: HT80 MCS9 less than 68 dBm 85 dBm at MCS0
BT: BER < 0.1% (Anritsu 8852B Tx -83Bm)
9.1.2 Antennas connectors specifications
Specifications are the same for both the following antennas connectors:
l 2.4 GHz Wi-Fi / Bluetooth
l 5 GHz Wi-Fi
Connector Layout:
Connector Specifications:
l RP-SMAconnector
l Gender: Female
Mating Connector Specifications:
l RP-SMAconnector
l Gender: Male
Connector Pinout:
Pin # Description
1 Male inner pin contact
2 Female connector body (outer thread)
42 / 76