User's Manual
Table Of Contents
- Trademarks
- Intended audience of this document
- Revision history
- How to get started
- Contents
- 1 Safety instructions
- 2 Consignes de securite
- 3 How to receive technical assistance
- 4 Comment obtenir une assistance technique
- 5 Conventions used
- 6 Product overview
- 7 Regulatory information
- 7.1 CE compliance
- 7.2 FCC/ISED compliance
- 7.2.1 FCC marking
- 7.2.2 FCC compliance: Class B Digital Device
- 7.2.3 FCC restrictions on 5 GHz Wi-Fi usage
- 7.2.4 ISED Canada compliance
- 7.2.5 ISED Class B Digital Device Notice
- 7.2.6 Responsible parties: Canadian Representative contact information
- 7.2.7 RF Radiation Exposure Statement
- 7.2.8 Labeling information
- 7.3 Antennas List
- 7.4 RoHS 3 compliance
- 7.5 REACH compliance
- 8 Interfaces overview
- 9 Interfaces in detail
- 9.1 Wi-Fi and Bluetooth
- 9.2 Internal Cellular Modem
- 9.3 MicroSIM card receptacles
- 9.4 GNSS
- 9.5 USB 0, USB 1, USB 2
- 9.6 ETH 0, ETH 1
- 9.7 COM 0, COM 1
- 9.8 CAN 0, CAN 1
- 9.9 Earth connection terminal
- 9.10 Display Port
- 9.11 Digital I/O and Analog IN
- 9.12 Audio connector
- 9.13 TTL Serial Console
- 9.14 MicroSD card receptacle
- 9.15 RTC (Real Time Clock)
- 9.16 TPM
- 9.17 Watchdog
- 9.18 Accelerometer and Gyroscope
- 9.19 Programmable pushbutton
- 10 Eurotech Everyware IoT
- 11 Mechanical specifications and dimensions
- 12 How to install the product
- 13 Power supply. How to turn ON/OFF and reset the product
- 14 How to maintain the product
- Notes
DynaGATE 20-30 User manual Rev. 0-7 9 Interfaces in detail
9.10 Display Port
The DynaGATE 20-30 provides a mini DisplayPort connector on the Front Side.
9.10.1 Display Port connector specifications
Connector Layout:
Connector Specifications:
l Mini DisplayPort socket
l Gender: Female
Mating Connector Specifications:
l Cable-Mount Mini DisplayPort plug
l Gender: Male
Connector Pinout:
Pin # Signal Type Description
1 GND1 P Ground
2 HP O Hot Plug Detect
3 L0+ O Lane 0 (positive)
4 CF1 O CONFIG1
5 L0- O Lane 0 (negative)
6 CF2 O CONFIG2
7 GND2 P Ground
8 GND3 P Ground
9 L1+ O Lane 1 (positive)
10 L3+ O Lane 3 (positive)
11 L1- O Lane 1 (negative)
12 L3- O Lane 3 (negative)
13 GND4 P Ground
14 GND5 P Ground
15 L2+ O Lane 2 (positive)
16 AUX+ O Auxiliary Channel (positive)
17 L2- O Lane 2 (negative)
18 AUX- O Auxiliary Channel (negative)
19 GND6 P Ground
20 PWR 3.3 Power for connector
53 / 76