User's Manual
Table Of Contents
- Trademarks
- Intended audience of this document
- Revision history
- How to get started
- Contents
- 1 Safety instructions
- 2 Consignes de securite
- 3 How to receive technical assistance
- 4 Comment obtenir une assistance technique
- 5 Conventions used
- 6 Product overview
- 7 Regulatory information
- 7.1 CE compliance
- 7.2 FCC/ISED compliance
- 7.2.1 FCC marking
- 7.2.2 FCC compliance: Class B Digital Device
- 7.2.3 FCC restrictions on 5 GHz Wi-Fi usage
- 7.2.4 ISED Canada compliance
- 7.2.5 ISED Class B Digital Device Notice
- 7.2.6 Responsible parties: Canadian Representative contact information
- 7.2.7 RF Radiation Exposure Statement
- 7.2.8 Labeling information
- 7.3 Antennas List
- 7.4 RoHS 3 compliance
- 7.5 REACH compliance
- 8 Interfaces overview
- 9 Interfaces in detail
- 9.1 Wi-Fi and Bluetooth
- 9.2 Internal Cellular Modem
- 9.3 MicroSIM card receptacles
- 9.4 GNSS
- 9.5 USB 0, USB 1, USB 2
- 9.6 ETH 0, ETH 1
- 9.7 COM 0, COM 1
- 9.8 CAN 0, CAN 1
- 9.9 Earth connection terminal
- 9.10 Display Port
- 9.11 Digital I/O and Analog IN
- 9.12 Audio connector
- 9.13 TTL Serial Console
- 9.14 MicroSD card receptacle
- 9.15 RTC (Real Time Clock)
- 9.16 TPM
- 9.17 Watchdog
- 9.18 Accelerometer and Gyroscope
- 9.19 Programmable pushbutton
- 10 Eurotech Everyware IoT
- 11 Mechanical specifications and dimensions
- 12 How to install the product
- 13 Power supply. How to turn ON/OFF and reset the product
- 14 How to maintain the product
- Notes
DynaGATE 20-30 User manual Rev. 0-7 1 Safety instructions
1 SAFETY INSTRUCTIONS
IMPORTANT: Read carefully and understand the instructions and warnings contained in this
document before installing / using the product. Keep this document for future reference.
To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the instructions
and warnings contained in this document.
Failure to comply with the instructions and warnings contained in this document, violates the standards of
safety, design, manufacture, and intended use of the product.
Eurotech assume no liability for any damage caused by failure to observe the instructions and warnings
contained in this document.
Whenever you have any doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support (for more information see "How to receive technical assistance" on page17).
1.1 Warning messages
1.1.1 Warning messages for harm to persons
To indicate an imminently hazardous situation which, if not avoided, will result in death or serious injury,
the following message is used:
DANGER
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in death or serious injury,
the following message is used:
WARNING
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
To indicate a potentially hazardous situation which, if not avoided, could result in minor or moderate injury,
the following message is used:
CAUTION
Sign
(if necessary)
TEXT THAT EXPLAINS THE HAZARD AND THE CONSEQUENCES OF NOT
AVOIDING IT.
Text that explains how to avoid this hazard.
9 / 76