User's Manual

DynaGATE 10-12 User manual Rev. 2-1 How to get started
HOW TO GET STARTED
To get started with the DynaGATE 10-12, follow these steps:
1. Read carefully and understand the instructions and warnings contained in this manual.
To lower the risk of personal injury, electric shock, fire, or damage to equipment, observe the
instructions and warnings contained in this manual.
For more information see: "Safety instructions" on page9.
Whenever in doubt regarding the correct understanding of this document, contact the Eurotech
Technical Support.
For more information see: "How to receive technical assistance" on page15
2. Know the DynaGATE 10-12 and its interfaces.
For more information see:
l "Product overview" on page21
l "Technical specifications" on page23
l "Interfaces overview" on page37
l "Interfaces in detail" on page43
3. Understand how to login the Administration Console and how to manage the interfaces in
Linux.
For more information see:
l "How to login the Administration Console" on page67
l "How to manage interfaces in Linux" on page69
4. Install the DynaGATE 10-12.
For more information see:
l "Mechanical specifications" on page97
l "How to install the product" on page99
5. Supply power to the DynaGATE 10-12 respecting all safety instructions.
For more information see: "Power supply. How to turn ON/OFF and reset the product" on page101
6. Start developing your IoT applications.
The DynaGATE 10-12 supports the Eurotech Everyware Software Framework (ESF). ESF is a
smart application container that enables remote management of IoT gateways and provides a wide
range of APIs allowing you to write and deploy your own IoT application.
For more information see:
l "Eurotech Everyware IoT" on page93
l http://esf.eurotech.com/docs.
3 / 114