Specifications

Getting Started
110124-30002, preliminary
11
3. Connect your network cable to the Ethernet socket.
4. Connect the 12 VDC adapter to the DC power input.
5. Connect the 12 VDC adapter to AC power.
The power LED illuminates green when the adapter is connected. After several
seconds, the operating system boots and the system sends console output to the
terminal.
6. Retrieve the IP address displayed on the terminal.
After the message “Bringing up interface eth0” is displayed, the IP address is
given as “inet addr:”.
7. Use a SSH client program and the IP address to log in remotely.