User's Manual

Regulatory information SYS-04240-23 User Manual 1-3
16
/ 42
5.3 Interruptions of voltage supply
The product meets the requirements defined in EN 50155, class S2 (10 ms. interruptions).
5.4 Vibration
The mechanical strength of the product meets the requirement of the category 1 class B defined in EN
50155.
5.5 EMC
The product meets the requirements defined in EN 50155.
5.6 Safety
The product meets the requirements defined in EN 62368.
5.7 Fire and smoke
The product meets the requirements defined in EN 45545.
5.8 Road vehicle compliance
This product has been manufactured in compliance with the ECE ONU R10 Rev. 5.
5.9 RoHS 3 compliance
The product has been manufactured in compliance with the following Directives:
• Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
• Commission Delegated Directive (EU) 2015/863 of 31 March 2015 amending Annex II to Directive
2011/65/EU of the European Parliament and of the Council as regards the list of restricted
substances
5.10 REACH compliance
This product has been assessed to be in compliance with the regulation (EC) No. 1907/2006 (REACH)
(with the exceptions allowed by the EU Technical Committee).
Eurotech has set in place a monitoring process to assess compliance to REACH regulation.
For details and more information contact the Eurotech Technical Support (see How to receive technical
assistance on page 9).