User manual

ManualsBrandsEUROTIME ManualsClocks & WatchesRadio Wall clock 30 cm x 5 cm Silver

RCC Wall Clock with Wireless Doorbell

User Manual

Thanks for choosing our product-RCC Wall Clock with Wireless Doorbell. Before using, please

read the user manual carefully.

Using tips:

1. Please do not place the doorbell transmitter onto metal door or other metal objects.

Metal will reduce the signal transmission distance and quality. Also please do not hang

the wall clock on metal wall.

2. The transmission distance of the doorbell transmitter is about 150 meters. Please do

test the effective transmission distance in your house and make sure that the doorbell

works well.

3. Please press the transmitter button after the music completing. During the music

playing, it is not workable to press the transmitter button.

4. Please change transmitter battery when the signal transmission is not good as normal.

5. When the sound decibel becomes low or the selected music is changed to 'Ding-dong'

sound automatically., that means the battery is low, please change the receiver

batteries.

6. If your receiver is interfered by others, please press 'SIGNAL' button to re-set a new ID

code. (Please see the 'Setting ID Code' instruction.)

7. ABSOLUTELY necessary is the tuning of the ID code of the receiver / transmitter!

Press 'SIGNAL' button for at least 3 seconds, when you see the LED light on, the

receiver enters into ID receiving mode. There are 2 minutes for ID receiving mode.

Press the button on the transmitter during ID receiving mode. If the LED light on the

receiver flashing, it means that the receiver received the ID code successfully.

Features:

1. RCC wall clock with wireless doorbell.

2. Automatically setting time by RCC signal.

3. Wireless doorbell, transmission distance is up to 150 meters in open area.

4. Built-in 16-digit code avoids the interference from other wireless doorbells.

5. Easily mounting design and water resistant design for the transmitter.

6. 3 doorbell modes for option: a) Music mode b) Light mode c) Music & Light

Mode Light mode is for old people or hearing impaired people.

7. 36 melody doorbell sounds for selection, and played loud and clear through good

quality speaker.

8. Power: AA battery x 3 for receiver part ; AA x 1 for movement; CR2032 x 1 for

transmitter.

Summary of content (5 pages)

PAGE 1
RCC Wall Clock with Wireless Doorbell User Manual Thanks for choosing our product-RCC Wall Clock with Wireless Doorbell. Before using, please read the user manual carefully. Using tips: 1. Please do not place the doorbell transmitter onto metal door or other metal objects. Metal will reduce the signal transmission distance and quality. Also please do not hang the wall clock on metal wall. 2. The transmission distance of the doorbell transmitter is about 150 meters.
PAGE 2
Installing and mounting the doorbell transmitter: Picture 1 1. Press down the fastener on the fixing plate of the transmitter and pull out the transmitter body(see Picture 1). Picture 2 2. Push up the front cover at the top side and uninstall the front cover. Then you will see there is a insulation sheet. Please pull it out and install the front cover back and screw it.
PAGE 3
Picture 4 (Fixing Plate Installation 2) 3. There are 2 expansion screws for installation. If you have electric drill, you can install the fixing plate by the 2 expansion screws (see Picture 3). Also you can install the fixing plate by the EVA sticker (see Picture 4), but before sticking the EVA sticker, please make sure the surface is clean and smooth.
PAGE 4
Instruction of Receiver: Getting the Receiver Worked Please insert 3 pieces of AAA batteries into the receiver part correctly.Please see the polarities +/- in the battery room. Setting ID Code Press 'SIGNAL' button for at least 3 seconds, when you see the LED light on, the receiver enters into ID receiving mode. There are 2 minutes for ID receiving mode. Press the button on the transmitter during ID receiving mode.
PAGE 5
How to change battery of receiver: Conformity: Eurotime Uhrenvertriebs-GmbH, Schweinfurter Str. 24, 97337 Dettelbach Germany hereby declares that the item complies with the basic requirements and regulations of Directive 1999/5/EC. A copy of the signed and dated declaration of conformity can be requested from info@eurotime.