User manual

Instruction of Receiver:
Getting the Receiver Worked
Please insert 3 pieces of AAA batteries into the receiver part correctly.Please see the polarities
+/- in the battery room.
Setting ID Code
Press 'SIGNAL' button for at least 3 seconds, when you see the LED light on, the receiver enters
into ID receiving mode. There are 2 minutes for ID receiving mode. Press the button on the
transmitter during ID receiving mode. If the LED light on the receiver flashing, it means that the
receiver received the ID code successfully.
Setting Doorbell Mode
There are 3 doorbell modes for option. Slide the switch to choose doorbell mode.
1) Music-The music will play when the transmitter button is pressed.
2) Light-The light will flash when the transmitter button is pressed.
3) Music & Light-The music will play and the light will flash at the same time when the
transmitter button is pressed.
Setting Music
Press 'MELODY' button to select music(there are 36 melodies for option).
Press 'VOLUME; button to adjust the music volume.
Dealing with Signal Interference
If your receiver is interfered by others, please press 'SIGNAL' button to re-set a new ID code.
(Please see the 'Setting ID Code' instruction.)
Warnings:
1. Better keep away from humidity, rain, sunlight and metal objects.
2. Please do not try to disassemble the product in case of making the product broken.
3. The transmission distance will be different in different environments. For example, the
metal wall will reduce the transmission distance of signal.
4. Do not put the product into water or other liquid.
Battery:
The transmitter is powered by 1 piece of CR2032 battery.
The receiver is powered by 3 pieces of AA batteries(not included).
The movement is powered by 1 piece of AA battery(not included).
Please do not use re-chargeable batteries.
Please do not mix using different types of battery.
Please do not recharge non-rechargeable batteries.
Please remove the batteries from product if it will not be used for a long time to avoid battery
liquid leaking.
Please remove the exhausted batteries to avoid battery liquid leaking.
Please dispose the used batteries correctly in case of environment pollution.