Manualshelf

Instruction manual

ManualsBrandsEutech Instruments ManualsOtherALPHA CON 500 2-WIRE TRANSMITTER
11121314151617181920
Instruction Manual αlpha CON 2000
14
NOTE:
1) Switch or circuit breaker shall included in the building installation.
2) It shall be in close proximity to the equipment and within easy reach of the
operator.
3) It shall be marked as the disconnecting device for the equipment.
The power cable (L, N & E) need to be connected to the instrument with two turns
through Enclosed Ferrite Wurth Electronik 742 712 21 which is supplied as an
accessory with the instrument.
It is strongly suggested that the Ferrite element supplied as a standard accessory
be installed as described below.