Instruction manual

Instruction Manual CyberScan PC5500/ 5000

102

To Select Reference Temperature

This screen allows you to select the reference temperature to be

used in the determination of the conductivity of your sample.

1. Access the Select Reference Temperature screen from the

Conductivity Setup screen. The current Reference Temperature

is displayed.

2. Touch C or F to select the desired Temperature units for the

reference temperature.

3. Use the arrow keys to highlight the desired reference

temperature

4. Touch enter to accept the reference temperature and return to

the conductivity Setup screen.

Touch exit to return to the Conductivity Setup screen, without

making any changes.



The units of all temperature parameters must match. The meter will

automatically modify units of Default Temperature, Reference

Temperature and the Temperature Coefficient to match the last

choice made on any of these 3 screens. If Kelvin is desired, it must

be selected in either the default Temperature screen of the

Temperature Coefficient screen.