Instruction manual

Instruction Manual CyberScan PC5500/ 5000
107
To Set Alarm Limits
This option allows you to set alarm limits for the Conductivity
measuring mode. If the Conductivity value of the measurement is
outside of the boundaries set by the upper and lower limits, an
audible alarm and/ or a visual warning will appear to let you know that
your sample measurement was outside of the set limits.
The Conductivity alarm limits are set the same way as previously
described in pH setup. See page 60 for instructions.
To Set Print Criteria
This screen allows you to select which criteria are printed with the
measurement when you print the data or send it to the computer. The
status of the current print criteria is displayed on the screen. The
criteria option is active if “ON” appears to the right of the option. It is
inactive if “OFF” appears to the right of the option. Any active criteria
will be printed on demand.
The Conductivity Print Criteria are set the same way as previously
described in pH setup. See page 62 for instructions.
To Set Print Interval
You have three options for setting the print interval: manual printing,
stable reading printing, and timed interval printing.
The Conductivity Print Interval is set the same way as previously
described in pH setup. See page 64 for instructions.