Instruction manual

Instruction Manual CyberScan PC5500/ 5000
108
To Set Data Storage Criteria
This screen allows you to select what criteria are stored in the meter’s
memory with the measurement when you save the data. The status
of the current data storage criteria is displayed on the screen. The
criteria option is active if “ON” appears to the right of the option. It is
inactive if “OFF” appears to the right of the option. All storage criteria
will be stored in the meter’s memory with the measurement.
However, only active items will appear on the View Stored Data
screens. Changing the status of the storage criteria to active from
inactive will allow the criteria to be displayed on the View Stored Data
screen with the previously stored data.
The Conductivity Data Storage Criteria are set the same way as
previously described in pH Setup. See page 66 for instructions.