Instruction manual

Instruction Manual CyberScan PC5500/ 5000
122
This CyberScan meter offers you unparalled versatility with respect to
ion analysis. You can choose one of the 6 methods of analysis, the
specific electrode you will be working with and also the units that you
would like the meter to use when reporting the ion concentration. The
Ion Measure screen displays the direct readout of sample
concentration in the desired units, as well as the time and date of the
last calibration. The standards used in the calibration and the slope of
the electrode are also displayed on the screen. It is important to note
that the concentration reported by the meter is actually the
concentration of free uncomplexed ions in your solution.
At the basic Procedural level the only setup options that you can
access are the Electrode Type., the Print Interval and the number of
Significant Digits. If you need to change any other parameter such as
Ion method or measurement units you will need to set the procedural
Level to Advanced in the System Setup screen. Any values
previously saved in the Ion setup screen at the advanced procedural
level will become the default values for the basic procedural level.
Connect the electrodes you will be using to the meter. See page 3 for
details.

Remember to setup your Ion measuring mode parameters. Refer to
pages 83-92 for Ion setup instructions.

Remember, HELP is always just a touch of the button away.