Instruction manual

Instruction Manual CyberScan PC5500/ 5000
153
17.3 Factory Default Settings
The following is the list of factory default settings for this CyberScan
meter. You can reset your meter to the factory default settings by
accessing the Reset to Factory Defaults from the System Setup
screen.
Mode Screen Default Setting
System Setup Time
Date
Print configuration
Procedural level
Operator ID
Beeper Status
Display Contrast
12 hour time mode
month/ day/ year
baud rate 19200
parity none
data bits 8
stop bits 1
advanced
none
ON
15
pH Setup Display configuration
Print configuration
Data configuration
Buffer Group
Sample ID#
Isopotential Point
Print interval
Display resolution
Auto Buffer Recognition
Auto Read Mode
Temperature Units
Default Temperature
Stability Criteria
Default Slope
alarm limits
alarm limit low
alarm limit high
All parameters ON
All parameters ON
All parameters ON
USA
None
0 mV
manual
X.X
ON
OFF
Celsius
25.0°C
Medium
59.16mV
OFF
0.000
14.000
mV Setup Display configuration
Print configuration
Data configuration
Sample ID#
Print interval
Display resolution
mV readings
alarm limits
alarm limit low
alarm limit high
All parameters ON
All parameters ON
All parameters ON
None
manual
X.X
Absolute mV
OFF
-1800.0
1800.0