Instruction manual

Instruction Manual CyberScan PC5500/ 5000
15
prev
next
print
meas
setup
edit
clear
std
BS
BS
delete
S
This button accesses the standardization screen from the
various measurement modes and initiates standardization of
the meter once the standardization screen is accessed.
This button is the measure button and directs the meter to
measure your sample when in the Auto Read function of the
pH mode.
This button will access the setup screens for the measuring
mode that you are currently using. It can also be used to
access the system setup screen that allows you to set
parameters that are not related to measurements such as the
times and the date.
The print button will send information to the output device that
you have connected to your CyberScan meter. The output
device can be a printer, data logger or a computer. In addition
to this, touching the print button will also send data to the data
storage center of the meter if a sample ID # has been assigned
to your sample.
The arrow keys on he screen move the cursor up and down in
order to highlight parameters that you would like to review or
edit.
The edit button appears on the setup screens. After you have
highlighted a parameter that you would like to change, the edit
button allows you to access the available options for that
parameter.
The clear button allows you to remove a setup parameter or
standard buffer value from the meter’s memory that may have
been entered at a previous time or by a previous user that is no
longer of value to you. Touching the clear button erases the
value so you may enter a new one. It can also erase the data
from the memory of the meter.
The BS button is a backspace button. It appears on keypad
screens and it allows you to back up and delete a character
entered in error.
The delete button appears on the “View Stored Data” screens.
This button allows you to erase the data from the memory of
the meter.
The prev button appears on the Data Screens when the data
stored in the meter’s memory has been accessed. It allows you
to scroll through data points sorted and stored prior to the
current data point displayed.
The next button appears on the Data Screens when the data
stored in the meter’s memory has been accessed. It allows you
to scroll through data points sorted and stored prior to the
current data point displayed.