Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This screen can be used to set the present time which will be

displayed on the measure screens. This time will also be printed on

demand and stored in the data storage center of the meter when data

is saved. There are two formats options for the time. The clock can

be set as either a 12 hour clock or a 24 hour clock.

To Set Time

1. Access the set time screen from the System Setup screen. The

current time and numeric keypad are displayed on the screen.

2. Touch clear to delete the current entry.

3. Touch the 24hr or 12hr button to format the clock as either a 12

hour or a 24 hour clock.

4. Touch am or pm to set the appropriate time.

5. Use the numeric touch pad to enter desired time, separating the

hour and the minutes by touching the “

:” key in the keypad.

6. Touch enter to accept the time in the current format

Touch exit to return to the System Setup screen, without making

any changes.



If you do not use the “:”, the meter will not accept the time.

Current 12HR

Current 24HR

5:15 pm

17:15