Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This selection screen allows you to choose the amount of information

that you want to have displayed on the screen. There are two levels

to choose from. Both of the levels provide identical results. The

amount of information appearing on the measure screens and the

number of setup parameters you can manipulate will vary from Basic

to Advanced procedural levels.

LEVEL1- Basic level

This level option offers a full set of prompts to guide you through the

basic operation of the meter. The information provided on the screen

is minimal to reduce clutter. It includes the measurement and the last

standardization time and buffer values. The data box at the bottom of

the measure screen includes the current date, time, sample

temperature and the electrode performance. In addition to the limited

information appearing on the measure screen, there are also fewer

options available to you in the setup screens of the various

measurement modes.

LEVEL 2- Advanced level

This option allows you to access to all of the features available on the

meter. A full set of prompts is available on virtually every screen to

lead you through the operation of the meter. You are also given

access to all setup parameters for the various measurement modes.

Any parameter not appearing on the basic level setup screens will

maintain the value previously set in the advanced level setup

screens. They will not automatically default to factory default settings.

This is ideal if you want to “lock” in a parameter in the Advanced

Level and switch to the Basic Level so others cannot accidentally

modify the parameters.

To Select Procedural Level

1. Access the select procedural level screen from the System Setup

screen. The current procedural level is displayed on the screen.

2. Use the numbered buttons on the right of the screen to select the

desired procedural level.

3. Touch enter to accept the procedural level and return to the

System Setup screen.

Touch exit to return to the System Setup screen, without making

any changes.