Instruction manual

TABLE OF CONTENTS
1 INTRODUCTION 1
1.1 Introducing the CyberScan Series 1
2 UNPACKING THE METER 2
3 GETTING STARTED 3
3.1 Connectors (PCD 5500 only) 3
3.2 pH Electrodes & Ion Specific Electrodes (PCD5500 & PC5500 only 6
3.3 Conductivity Probes 8
4 USING THE METER 10
4.1 Touch screen Operation 11
4.2 Choosing a channel (for PCD5500 & PC5500 only) 12
4.3 Button Functions 14
5 SYSTEM SETUP 16
5.1 Access system setup 17
5.2 Select Language 19
5.3 Set Date 21
5.4 Set Time 23
5.5 Set Beeper Status 25
5.6 Select procedural level 27
5.7 Set Print Configuration 29
5.8 Set Baud Rate 31
5.9 Set Number of Bits 32
5.10 Set Stop Bits 33
5.11 Set Parity 34
5.12 Set Operator 35
5.13 Set Display Contrast 37
5.14 Display Meter Information 39
5.15 Reset to Factory Defaults 40
6 pH SETUP 41
6.1 Access pH setup 42
6.2 Set Sample ID# 44
6.3 Select Buffer Group 48
6.4 Set pH Custom Buffer Group 50
6.5 Select Buffer Recognition 52
6.6 Select Auto Read Mode 53
6.7 Set pH Stability Criteria 54
6.8 Set Default Temperature 56
6.9 Set Isopotential Point 58
6.10 Set Alarm Limits 60
6.11 Set Print Criteria 62
6.12 Set Print Interval 64
6.13 Set Data Storage Criteria 66
6.14 Set Display Resolution 68
6.15 Set Display Configuration 70
6.16 View Stored Data 72
7 mV SETUP 76
7.1 Access mV Setup 77
7.2 Set Display Resolution 81
8 ION SETUP 83
8.1 Access Ion Setup 84
8.2 Select Ion Method 86
8.3 Select Measurement Units 88
8.4 Select Electrode Type 90
8.5 Set Significant Digits 92