Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This option allows you to identify the user of the meter. This

information can be saved in the meter’s memory. It can also be

printed out with measurement data on demand. The operator

identification can be up to 9 characters in length.

To Set Operator

1. Access the Set Operator screen from the System Setup screen.

The current operator identification is displayed on the screen.

2. Touch clear to remove the current operator identification.

3. Use the alphanumeric keys on the touch screen to enter the

desired operator identification. The BS button will allow you to

backspace to remove a character that was incorrectly entered.

The operator identification code can be a maximum of 9

characters in length.

4. Touch enter to accept the new operator identification.

To deactivate the operator identification:

a) Touch clear to erase the current user identification.

b) Touch enter to return to the System Setup screen.

Touch exit to return to the System Setup screen.

Touch exit to return to the System Setup screen, without making

any changes.