Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This option allows you to change the contrast on the screen to

improve the readability of the information presented on the screen.

The numbering system that appears on the screen is from 0 to 25.

The darkest setting is 0 and the lightest setting is 25.

To Set Display Contrast

1. Access the Set Display Contrast screen from the System Setup

screen. The current display contrast value is displayed on the

screen.

2. Use the lighter or darker button to adjust the contrast of the

screen to the desired level.

3. Touch save to accept the contrast setting and return to the

System Setup screen.

Touch exit to return to the System Setup screen, without making

any changes.



The display contrast of the screen is affected by the internal

temperature of the meter. The meter will warm up after being plugged

in. during this period (approximately 20 minutes), the display contrast

of the screen will get lighter. You may need to adjust the contrast

during this period to meet your specifications.