Instruction manual

9 CONDUCTIVITY SETUP 94
9.1 Access the Conductivity Setup 95
9.2 Select Cell Constant 99
9.3 Select Reference Temperature 101
9.4 Set Temperature Coefficient 103
9.5 Perform Replatinization 105
9.6 Set Significant Digits 109
10 pH OPERATION 111
10.1 Standardizing 113
10.2 pH Measurements 117
11 mV OPERATION 119
11.1 mV Measurement 120
12 ION OPERATION 121
12.1 Direct Reading Methods 123
12.2 Incremental Methods 129
12.3 Known Addition Method 131
12.4 Known Subtraction Method 135
12.5 Analate addition 137
12.6 Analate Subtraction 139
13 CONDUCTIVITY OPERATION 141
13.1 Conductivity Standardization 143
13.2 Measurement 146
14 CLEANING 148
15 TROUBLE SHOOTING 149
16 COMPLIANCE 150
17 APPENDIX 151
17.1 Determining Isopotential Points Experimentally 151
17.2 Data Management 152
17.3 Factory Default Settings 153
17.4 pH Theory 155
17.5 ISE Theory 160
17.6 Conductivity Theory 164
18 METER SPECIFICATIONS 169
19 ACCESSORIES 171
19.1 Replacement Meters and Adapters 171
19.2 General Purpose pH / ORP Electrodes
SP
172
19.3 Specialty pH Electrode
NP
173
19.4 pH Buffer Solutions & Single Use Sachets
SP
174
19.5 ORP Solutions
SP
174
19.6 Conductivity & TDS 442 Standard Solutions
SP
174
20 WARRANTY 175