Instruction manual

Instruction Manual CyberScan PC5500/ 5000

When this option is active, each time you touch print on the

Measure screen the pH value along with the date/ time/ channel

and the sample ID# will be sent to data storage. (for additional

information on saved parameters). You can manually enter an

alphanumeric identification number of up to 9 characters for any

sample or you can have the meter sequentially number your

samples beginning at the number of your choice. You may

choose to deactivate the sample ID#.

To Set Sample ID#

Manual ID# Assignment

1. Access the Set Sample ID# screen from the pH (mV, Ion,

Conductivity) Setup screen.

2. Touch man for manual ID# entry. The current ID# is

displayed on the screen.

3. Touch clear to delete the current ID#.

4. Use the alphanumeric keypad on the screen to meter the

desired Sample ID#. The BS Key will allow you to backspace

to remove a character that was incorrectly entered.

5. Touch enter to accept the current ID# and return to the pH

(mV, Ion, Conductivity) Setup screen.