Instruction manual

Instruction Manual CyberScan PC5500/ 5000

1 INTRODUCTION

1.1 Introducing the CyberScan Series

Thank you for selecting a Eutech Instruments CyberScan Bench

meter. This manual describes the operation of the CyberScan Series

5000 bench meter. The state-of-art meter that you have purchased is

easy to operate and will guide you through the various functions by

displaying easy to understand prompts. This instruction manual

should answer any questions that might arise in operating your meter,

however, do not hesitate to call our Technical Support at (65) 6778

6876 (ext 839) or fax at (65) 6773 0836.

This bench meter provides microprocessor precision in a compact

benchtop design that is easy to use. One touch screen controls all

procedures, letting you:

 Measure pH, absolute mV, relative mV or Conductivity

 Select one of three sets of standard buffer groups

 Implement automatic buffer recognition

 Standardize with up to five standard or customer buffers

 Customise your display screen and +

 operating parameters

 Assign operator and sample identification numbers

 Store 250 data points (1000 for PCD5500) in the meter’s

memory or transfer data to a computer or printer.

 Access extensive online help with just a touch a button

It all adds up to rapid, completely automatic, intuitive operation.



You will find this symbol appearing in this manual; it indicates useful

tips that ease your meter operation.