Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This setup screen allows you to determine how quickly the meter will

respond to electrode drift. There are 3 speed settings: fast, medium

and slow.

To set pH Stability Criteria

1. Access the Set pH Stability Criteria screen from the pH (Ion)

Setup screen. The current stability criteria are displayed on the

screen.

2. Use the arrow keys to highlight the desired stability criteria.

3. Touch enter to accept the stability criteria and return to the pH

(Ion) Setup screen and return to the pH Setup screen.

Touch exit to return to the pH (Ion) Setup screen, without making

any changes.



Stability criteria are more stringent at the slower setting. Therefore, if

the highest precision is required, then a slow setting would be

desired. The default setting is the medium speed and this would be

adequate for the majority of applications.