Instruction manual

Instruction Manual CyberScan PC5500/ 5000

This screen allows you to select which criteria are printed with the

measurement when you print the data or send it to the computer. The

status of the current print criteria is displayed on the screen. The

criteria option is active if “ON” appears to the right of the option. It is

inactive if “OFF” appears to the right of the option. Any active criteria

will be printed on demand.

To Set Print Criteria

1. Access the Set Print Criteria screen from the pH (mV, Ion,

Conductivity) Setup screen. The current print criteria are

displayed on the screen.

2. Use the arrow keys to highlight the print criteria option you want

to modify.

3. Touch ON or OFF change the status of the criteria.

4. Repeat steps 2 and 3 with the remaining criteria.

5. Touch save to save the entire group of print criteria and return to

the pH (mV, Ion, Conductivity) Setup screen.

Touch exit to return to the pH (mV, Ion, Conductivity) Setup screen,

without making any changes.



The Date/ Time/ Channel option and the measurement option are

always active and cannot be deactivated. These criteria will always

be printed. Because they can not be changed, they will not be

highlighted when using the arrow keys.