Instruction manual

Instruction Manual CyberScan PC5500/ 5000
65
For stable reading printed
In this mode, data is printed every time the meter recognises the
current pH (mV, Ion, Conductivity) measurement as stable.
1. Access the Set Print Interval screen from the pH (mV, Ion,
Conductivity) Setup screen. The current print interval is displayed
on the screen.
2. Touch stable to set the meter for stable reading printing.
3. Touch enter to accept the print interval mode and return to the
pH (mV, Ion, Conductivity) Setup screen.
Printing is now done when the meter recognises the present
reading as stable.
OR
Touch exit to return to the pH (mV, Ion, Conductivity) Setup
screen, without making any changes.
For timed interval printing
In this mode, data is printed at the timed interval that you select.
1. Access the Set Print Interval screen from the pH (mV, Ion,
Conductivity) Setup screen. The current print interval is displayed
on the screen.
2. Touch timed to access the timed interval mode and delete the
current print interval time.
3. Use the keypad to enter the desired time for the print interval.
4. Touch enter to accept the new time interval for printing and
return to the pH (mV, Ion, Conductivity) Setup screen.
Printing is now done at the set timed interval.
OR
Touch exit to return to the pH (mV, Ion, Conductivity) Setup
screen, without making any changes.