Instruction manual

Instruction Manual CyberScan PC5500/ 5000
71
January 15, 2002 11:11am
ID#
00000
auto buffer
ON
ATC
25.0°C
slope
100%
mV
0000.0
pH Display Configuration
This function will allow you to choose what information you would like
to be displayed on the pH Measure screen, particularly the
information contained in the data box at the bottom of that screen.
To Set Display Configuration
1. Access the Set Display Configuration screen from the pH (mV,
Ion, Conductivity) Setup screen. The current display configuration
is displayed on the screen.
2. Use the arrow keys to highlight the Display Configuration criteria
you want to modify.
3. Touch ON or OFF to change the status of the criteria
4. Touch save to save the entire group of display configuration
criteria and return to the pH (mV, Ion, Conductivity) Setup screen.
OR
Touch exit to return to the pH (mV, Ion, Conductivity) Setup
screen, without making any changes.